Brother FAX-8360P - Manual (Page 49)

AD
VANCED F
AX USE
Advanced Sending 41
ZLeFAX-UK-FM6.0
Using Memory Security
You need to use a password to switch Memory Security ON and OFF.
Setting Up Memory Security for the First Time
1
Press Menu, 2, 0, 1.
2
Enter a 4-digit number as a password.
3
Press Set.
The screen prompts you to re-enter the password.
4
Re-enter the password and press Set.
5
Press or to choose SET SECURITY.
6
Press Set.
The screen prompts you to enter the password.
7
Enter a 4-digit password, followed by Set.
This is the same as the security password of the
machine already stored.
The screen displays ACCEPTED for 2 seconds, followed by SECURE MODE - Memory Security
is now switched ON.
Changing the Memory Security Password
1
Press Menu, 2, 0, 1.
2
Press or to choose SET PASSWORD.
3
Press Set.
The screen prompts you to enter the old password.
4
Enter the current password.
5
Press Set.
6
Enter a 4-digit number as a new password.
7
Press Set.
The screen prompts you to re-enter the new password.
8
Enter the new password again and press Set.
9
Press Stop/Exit.
If the password you enter at Step 7 is incorrect, the screen would display WRONG
PASSWORD. After 2 seconds the display will then return to normal (displaying the
date & time). You must then switch ON Memory Security again. (See Switching
Memory Security ON, page 42.)
NEW PASSWD:XXXX
ENTER & SET KEY
VERIFY:XXXX
ENTER & SET KEY
PASSWORD:XXXX
ENTER & SET KEY
OLD PASSWD:XXXX
ENTER & SET KEY
NEW PASSWD:XXXX
ENTER & SET KEY
VERIFY:XXXX
ENTER & SET KEY