Brother FAX-8360P - Manual (Page 45)

AD
VANCED F
AX USE
Advanced Sending 37
ZLeFAX-UK-FM6.0
Overseas Mode
Sometimes, when sending a fax to overseas numbers, problems can be experienced. This mode
makes the machine work better for such calls.
After you send a fax using this feature, the feature turns itself off.
1
Insert the document face down in the ADF.
2
Press Menu, 2, 2, 9.
3
Press or to select ON (or OFF), and press Set when the screen displays your selection.
4
Press 1 if you want to select additional settings. The display returns to the SETUP SEND
menu—OR—Press 2 if you are finished choosing settings and go to Step 5.
5
Enter the fax number you’re calling, and press Fax Start.
Delayed Transmission (Timer)
You can use this function to send a fax up to 24 hours later.
1
Insert the document face down in the ADF.
2
Press Menu, 2, 2, 3.
3
Enter the time you want the fax to be sent, in 24-hour format (for example, enter 19:45 for 7:45
PM), and press Set.
4
Press 1 to select DOC—OR—Press 2 to select MEMORY. If you select 1.DOC, the machine
will not start scanning the document until the preset time. The document must be left in the ADF.
If you select 2.MEMORY the machine will scan and store the document and the ADF is free
for copying or faxing further documents.
5
Press 1 if you want to select additional settings. The display returns to the SETUP SEND
menu—OR—Press 2 if you are finished choosing settings and go to Step 6. The screen prompts
you to enter the fax number.
6
Enter the fax number, and press Fax Start. The machine will wait until the time you have
entered to send the fax.
Delayed Batch Transmission
Before sending the delayed faxes, your Brother machine will economize by sorting all the documents
in memory by destination and scheduled time. If you set Batch Transmission to ON, all delayed
faxes scheduled at the same time to the same fax number will be sent as one transmission.
1
Press Menu, 2, 2, 4.
2
Press or to select ON (or OFF) and press Set.
3
Press Stop/Exit.