Brother FAX-8360P - Manual (Page 28)

20 Chapter 1
ZLeFAX-UK-FM6.0
Changing One Touch and Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where a number is already stored,
the screen displays the current name stored there, then prompts you to either change it or exit.
1
Press Menu, 2, 3, 1 and press the One Touch Dial key where you want to change the number.
—OR—
Press Menu, 2, 3, 2 and use the dial pad to enter a three-digit location (001-200), and press Set.
2
Press 1 to change the number stored, or press 2 to exit without making a change.
3
Enter a new number.
◆ If you want to erase the number, press Clear when the cursor is to the far left of the digits.
◆ If you want to change a digit, use
or to position the cursor under the digit you want
to change, then enter the new digit—OR—Press Clear to delete all characters above and to
the right of the cursor.
4
Follow the directions in Storing One Touch Dial or Speed Dial Numbers.
You can print a list of all stored numbers. (See Using the Reports Key, page 34.)