Brother MFC-490CW - Manual (Page 39)

23
3
3
On/Off key
3
You can turn the machine on and off by
pressing the On/Off key.
Note
• If you press the On/Off key while the
machine is in use it will finish the operation
before going into the Off mode.
• If you have connected an external
telephone or TAD, it is always available.
Turning the machine off
3
a
Press and hold down the On/Off key
until the LCD shows Shutting Down.
The LCD will stay on for a few seconds
before going off.
Turning the machine on
3
a
Press the On/Off key.
Power Off setting
3
You can customize the machine's On/Off
key. The factory setting is
Fax Receive:Off. Your machine will not
work when it is switched off, but it will clean
the print head periodically. If you turn this
setting to Fax Receive:On, you can
receive faxes or calls even when the machine
is switched off. (See On/Off key on this page.)
a
Press Menu.
b
Press a or b to choose General Setup.
Press OK.
c
Press a or b to choose
PwrOff Setting.
d
Press d or c to choose
Fax Receive:On (or Fax Receive:Off).
Press OK.
e
Press Stop/Exit.
1 You cannot receive a fax with Black Start or
Color Start.
2 You cannot receive a fax automatically if you have
set the receive mode to Fax/Tel.
3 Set before you switch off the machine.
General setup
3
On/Off
setting Receive
mode Available
operations
Fax Receive:
Off
(factory
setting)
— No machine
operations will be
available.
Fax Receive:
On
1
Fax Only
External
TAD
Fax Receive
Easy Receive
Delayed Fax
3
Fax Forward
3
Paging
3
Fax Storage
3
PC Fax Receive
3
Remote Retrieval
3
Manual
Fax/Tel
2
Easy Receive
Delayed Fax
3