Brother MFC-490CW - Manual (Page 160)

144
Note
• If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
• If the print head is at the right corner as
shown in the illustration, you cannot move
the print head. Press Stop/Exit until the
print head moves to the middle. Then
unplug the machine from the power
source, and take out the paper.
• If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
g
Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3) using both bands.
h
Push the paper tray firmly back into the
machine.
Note
Make sure you pull out the paper support
until it clicks.
1
2 3