Brother MFC-490CW - Manual (Page 29)

Loading paper and documents
13
2
Loading photo paper
2
Note
In Canada, the photo bypass tray is
called the photo paper tray.
Use the photo bypass tray, which is located
on the top of the output paper tray cover, to
print on Photo (4"
× 6") and Photo L
(3.5" × 5") size paper. When you use the
photo bypass tray, you do not have to take
out the paper that is in the tray beneath it.
a
Squeeze the blue photo bypass tray
release button (1) using your right index
finger and thumb and push the photo
bypass tray forward until it clicks into the
photo printing position (2).
b
Press and slide the paper side
guides (1) and paper length guide (2) to
fit the paper size.
c
Put the photo paper into the photo
bypass tray and gently adjust the paper
side guides to the paper.
Make sure the paper side guides touch
the sides of the paper.
Check that the paper is flat in the tray.
Note
• Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
• Always make sure that the paper is not
curled or wrinkled.
Photo Bypass Tray
2
1
2
1