Brother MFC-490CW - Manual (Page 180)

164
Outgoing Call Send a fax — — You can choose a number
from the Outgoing Call
history and then make a
telephone call to it, send a
fax to it, add it to Speed Dial,
or delete it. 65
Add to Speed
Dial — —
Delete — —
Caller ID hist. Send a fax — — You can choose a number
from the Caller ID history and
then send a fax to it, add it to
Speed Dial, or delete it. 66
Add to Speed
Dial — —
Delete — —
Broadcasting Add Number — — You can send the same fax
message to more than one
fax number. 34
Speed Dial — —
Complete — —
Delayed Fax — — On (00:00)
Off*
Sets the time of day in
24-hour format that the
delayed faxes will be sent. 37
Batch TX — — On
Off*
Combines delayed faxes to
the same fax number at the
same time of day into one
transmission. 38
Real Time TX — — On
Off*
You can send a fax without
using the memory. 37
Polled TX — — On
Off*
Sets up your machine with
an document to be retrieved
by another fax machine. 76
Polling RX — — On
Off*
Sets up your machine to poll
another fax machine. 75
Overseas Mode — — On
Off*
If you are having difficulty
sending faxes overseas, set
this to On. 37
Glass ScanSize — — Letter*
A4
Adjust the scan area of the
scanner glass to the size of
the document. 33
Set New Default — — Yes
No
You can save your fax
settings. 38
Factory Reset — — Yes
No
You can restore all settings
to the factory settings. 39
Level1 Level2 Level3 Options Descriptions Page
The factory settings are shown in Bold with an asterisk.