Brother MFC-490CW - Manual (Page 149)

Troubleshooting and Routine Maintenance
133
B
Network Difficulties
Difficulty Suggestions
Cannot print over the Network. Make sure that your machine is powered on and is online and in Ready mode.
Print a Network Configuration list (see Reports on page 73.) and check the current
Network settings printed in this list. Reconnect the LAN cable to the hub to verify
that the cabling and network connections are good. If possible, try connecting the
machine to a different port on your hub using a different cable. If the connections
are good, the machine shows LAN Active for 2 seconds.
(If you are using a wireless connection or are having Network problems, see the
Network User’s Guide for more information.)
The network scanning feature does
not work.
(For Windows ® users only) Firewall settings on your PC may be rejecting the
necessary network connection. Follow the instructions below to configure the
Firewall. If you are using a personal Firewall software, see the User’s Guide for
your software or contact the software manufacturer.
For Windows ® XP SP2 and Windows Vista ® users, see Firewall settings in the
Software User’s Guide on the CD-ROM.
For Windows ® XP SP1 user’s, please visit the Brother Solutions Center
(http://solutions.brother.com).
The network PC-Fax Receive
feature does not work.
Your computer cannot find your
machine. ® users>
Firewall settings on you PC may be rejecting the necessary network connection.
For detail, see the instruction above.
®
users>
Re-select your machine in the Device Selector application located in
Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the model
list in ControlCenter2.