Brother MFC-490CW - Manual (Page 121)

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
105
12
j
The file name is set automatically
however, you can set a name of your
choice using the dial pad.
Press a or b to choose File Name.
Enter the new name. (See Entering Text
on page 173.)
You can only change the first 6 digits.
Press OK.
Note
Press Clear/Back to delete the current
name.
k
Press Black Start or Color Start.
How to change the file name
12
You can change the file name.
a
Press (Scan).
b
Press a or b to choose
Scan to Media.
Press OK.
c
Press a or b to choose File Name.
d
Enter the new name using the dial pad.
You can only change the first 6 digits.
(See Entering Text on page 173.)
How to set a new default
12
You can set your own default settings.
a
Press (Scan).
b
Press a or b to choose
Scan to Media.
Press OK.
c
Press a or b to choose
Set New Default. Press OK and 1 to
choose Yes.
d
Press Stop/Exit.
How to reset to the factory
settings
12
You can restore all the settings you have
changed to the factory settings.
a
Press (Scan).
b
Press a or b to choose
Scan to Media.
Press OK.
c
Press a or b to choose
Factory Reset. Press OK and 1 to
choose Yes.
d
Press Stop/Exit.