Brother MFC-490CW - Manual (Page 101)

Making copies
85
11
Using a scanned paper document as
your watermark
11
a
Press (Copy).
b
Enter the number of copies you want.
c
Press a or b to choose
Watermark Copy.
Press OK.
d
Press d or c to choose On.
e
Press a or b to choose
Current Setting.
Press OK.
f
Press a or b to choose Scan. Press OK,
and place the page that you want to use
for watermark on the scanner glass.
g
Press Black Start or Color Start.
h
Take out the watermark document you
scanned and load the document you
want to copy.
i
Press d or c to change the
Transparency of the watermark.
Press OK.
j
If you do not want to change any
additional settings, press Black Start or
Color Start.
Note
You cannot enlarge or reduce the
scanned watermark.
Setting your changes as the
new default
11
You can save the copy settings for Quality,
Enlarge/Reduce, Brightness,
Contrast or Page Layout that you use
most often by setting them the default
settings. These settings will stay until you
change them again.
a
Press (Copy).
b
Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
a
or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.