Brother PT-E300 - Manual (Page 51)

1
2
3
4
5
6
7
8
9
48
z
TRO
U
BLESHOOTING
Error Messages
When an error message appears on the display, follow the directions provided below.
Error Messages
Message Cause/Remedy
Wrong Type
Of Adapter
Connected!
An incompatible AC adapter is connected.
Use an appropriate AC adapter.
Low Battery! The installed batteries are getting weak.
Replace Battery! The installed batteries are about to run out.
Recharge
Li-ion Battery!
The battery is low. Please charge the lithium-ion battery.
Li-ion is damaged
Use other
power source!
The Li-ion is damaged. Please use an AC adapter or an other battery.
Unit Cooling
Wait XX min.
before restart!
High temperature error.
Cutter Error! The tape cutter has been closed when you tried to print or feed tape. Turn
the P-touch labeling system off and then on again before continuing. When
tape is tangled in the cutter, remove the tape.
Insert Tape
Cassette!
There is no tape cassette installed when you try to print or preview a label,
or feed tape. Install a tape cassette before continuing.
Text Full! The maximum number of characters have already been entered. Edit the
text and use fewer characters.
No Text! There is no text, symbols or bar code data entered when you try to print or
preview a label. Enter data before continuing.
Incorrect
Value!
The value entered for setting the tape length. Enter a valid value for the
setting.
Line Limit!
Max 5 Lines
There are already five lines of text when you press the Enter key. Limit the
number of lines to five.
Tape Width
Limit!
Max 3 Lines
There are more than three lines of text when you press the Print or Preview
key while using 0.47" (12mm) tape. Limit the number of lines to three, or
replace with a larger width tape cassette.
Tape Width
Limit!
Max 2 Lines
There are more than two lines of text when you press the Print or Preview
key while using 0.35" or 0.23" (9 mm or 6 mm) tape. Limit the number of
lines to two, or replace with a larger width tape cassette.
Tape Width
Limit!
Max 1 Line
There is more than one line of text when you press the Print or Preview key
while using 0.13" (3.5 mm) tape. Limit the number of lines to one, or
replace with a larger width tape cassette.
Block Limit!
Max 5 Blocks
There are already five blocks of text. Limit the number of blocks to five.
Length Limit! The length of the label to be printed using the text entered is longer than
39.37" (1 m). Edit the text so that the length of the label is less than 39.37"
(1 m).