Brother PT-E300 - Manual (Page 29)

1
2
3
4
5
6
7
8
9
26
z
GET
T
IN
G S
T
ARTED
Setting Language and Unit
Language
Press the Menu key to display the Setup menu, select "Language" using the or
key, and then press the OK or Enter key.
Select a language for menu commands and messages shown on the LCD display by
using the or key.
The language can be selected from "Čeština", "Dansk", "Deutsch", "English", "Español",
"Français", "Hrvatski", "Italiano", "Magyar", "Nederlands", "Norsk", "Polski",
"Português", "Português(Brasil)", "Română", "Slovenski", "Slovenský", "Suomi",
"Svenska" or "Türkçe".
Press the OK or Enter key.
Unit
Press the Menu key to display the Setup menu, select "Unit" using the or key, and
then press the OK or Enter key.
Select a unit for dimensions shown on the LCD display by using the or key.
Either "inch" or "mm" can be selected.
Press the OK or Enter key.
Setting Language and Unit
1
2
3
Press the Escape key to return to the previous step.
1
2
3
The default setting is "inch".
Press the Escape key to return to the previous step.