Brother PT-2100 User Manual

Page 48

EDITING A LABEL

Using Auto-Format Layouts

Select an attribute using the or keys, and then
set a value for that attribute using the or keys.

Press the

or key.

The block layout text entry screen is displayed.

Enter text and then press the

or key.

Repeat for each text field.
After all text fields are completed, press the

key to display the print menu.

Select "Print" using the or keys and then press the

or to print the

label.

Press the

key to set the selected attribute to

the default value.

Caps mode can be used when entering text.

• Select "Edit" to change the text data or style settings.
• Select "Save" to store the label in a file memory.
• Select "Quit" to exit the Auto-Format function.
• Select "Change Layout" to use a different layout.

• Press the

key to return to the previous step.

• Refer to the Block Layouts table on page 43 for a list of all available layouts.
• The “Clear All Text?” message is displayed when the

key is pressed. Press the

key to delete all text, or press the

key to not delete the text.

• To print multiple copies, sequentially numbered copies, or a mirror image of the label, with

the print menu displayed hold down the

key and press the

key to display the Print

Options menu.

• If the width of the current tape cassette does not match the set width for the selected layout,

an error message is displayed when you try to print the label. Press the

key or any other

key to clear the error message, and insert a tape cassette of the correct width.

• If the number of characters entered exceeds the limit, an error message is displayed when tthe

or key is pressed. Press the

key or any other key to clear the error message, and

edit the text using fewer characters.

• When using the Auto-Format function the label is cut with a margin on the left and right ends

regardless of the current Tape Cutting Option setting (refer to page 53).

This manual is related to the following products:

PT-2110