Brother PT-2100 - Manual (Page 37)

1
2
3
4
5
6
7
8
9
31
z
EDIT
ING A LA
BEL
Setting Character Attributes
Setting Character Attributes by Label
Using the key, you can select a font and apply size, width, style, line, and alignment
attributes.
Press the key.
The current settings are displayed.
Select an attribute using the or keys, and then
set a value for that attribute using the or keys.
Press the or key to apply the settings.
Setting Character Attributes by Each Line
When a label consists two or more lines of text, you can set different value of
character attributes (font, size, width, style, line and alignment) for each line.
Move the cursor to the line you wish to change the
character attribute by using the or keys. Next,
press the
key while holding down key to display
the attributes. ( on the screen indicates that you are
now applying the attribute for that specific line only.)
Setting Character Attributes
1
2
New settings are NOT applied if you do not press the
or key.
3
• Press the key to return to the previous step.
• Press the key to set the selected attribute to the default value.
• Refer to the Setting Options table for a list of all available settings.
• Small characters may be difficult to read when certain styles are applied (e.g. Shadow + Italic).
When different value of attribute is set for each line, the value
will be displayed as **** when you press the
key. When
you change the setting on this screen by using the or keys,
the same change will be applied to all lines of the label.