Brother MFC-9010CN - Manual (Page 81)

Troubleshooting and routine maintenance
69
C
Paper is jammed at the back of the
machine
C
If the LCD shows Jam Rear, a paper jam
occurred behind the face-up output tray.
Follow these steps:
a
Turn off the machine's power switch.
Disconnect all cables, and then unplug
the power cord from the AC power
outlet.
b
Open the back cover.
CAUTION
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. Wait at least 10 minutes for
the machine to cool down before continuing
to the next step.
c
Push down and pull the green tabs at
the left and right hand sides toward you
and fold down the fuser cover (1).
d
Using both hands, gently pull the
jammed paper out of the fuser unit.
e
Close the fuser cover (1).
f
Fully close the back cover.
g
Plug the machine’s power cord back into
the AC power outlet first, and reconnect
all cables. Turn on the machine’s power
switch.
1
1