Brother MFC-9010CN - Manual (Page 24)

Chapter 2
12
Printing on thick paper, labels,
envelopes or small paper
2
When the back output tray is pulled down, the
machine has a straight paper path from the
manual feed slot through to the back of the
machine. Use this paper output method when
you want to print on thick paper, labels,
envelopes or paper that is smaller than
4.1
× 5.8 in. (or A6 size).
Note
• Remove each printed sheet or envelope
immediately to prevent a paper jam.
• The machine automatically turns on the
Manual Feed mode when you put paper in
the manual feed slot.
a
Open the back cover (back output tray).
b
Pull down the two gray levers, one on
the left-hand side and one on the
right-hand side, toward you as shown in
the illustration below.
c
Open the manual feed slot cover.
d
Using both hands, slide the manual feed
slot paper guides to the width of the
paper that you are going to use.