Brother MFC-9010CN User Manual

Page 25

Loading paper and documents

Using both hands, put one sheet of
paper or one envelope in the manual
feed slot until the front edge of the paper
or envelope touches the paper feed
roller. When you feel the machine pull in
the paper, let go.

Note

• Put the paper into the manual feed slot

with the side to be printed face up.

• Make sure that the print media is straight

and in the proper position on the manual
feed slot. If it is not, the paper may not be
fed properly, resulting in a skewed printout
or a paper jam.

• Do not put more than one sheet of paper

in the manual feed slot at any one time, as
it may cause a jam.

• Pull the paper out completely when you

retry putting the paper into the manual
feed.

• If you put paper or other print media in the

manual feed slot before the machine is in
the Ready mode, an error may occur and
the machine will stop printing.

• To easily remove a small printout from the

output tray, lift up the scanner by using
both hands as shown in the illustration.

• You can still use the machine while the

scanner is up. To close the scanner, push
it down with both hands.

• When the top cover is open, you cannot

open the scanner.