Brother PT-2600 - Manual (Page 95)

88
You can emphasize your text by underlining it or striking it out.
The default underline setting is OFF. When the Underline function is set to any setting other
than OFF, the Udl/Frm indicator on the right side of the display comes on.
To change the underline setting:
1 While holding down c, press 5 once, and keep c held down to display the cur-
rent underline setting.
2 While still holding down c, continue pressing 5 until the desired underline setting is
displayed.
☞
The Udl/Frm indicator comes on when a setting other than OFF is selected.
3 Release
c to apply the selected underline setting to the text.
EXAMPLE
FONT 7
FONT 8
UNDL
ON1 UNDL
ON2
To select the ON1 underline setting:
1 While holding down
c
, press
5
once, and
keep
c
held down.
Font
Setting
Style Setting
I+BOLD I+OUTL I+SOLID I+SHAD VERT
TZ-T
ape
AV
-Label
UNDERLINE FUNCTION
O F F
U N D L