Brother PT-2600 - Manual (Page 111)

104
This function allows you to print up to 99 copies of the same text.
To use the Repeat printing function:
1 Hold down c and press I. The message
“ COPIES ” appears in the display with the
default setting 1, which may be changed as necessary.
☞
To cancel the Repeat printing function at any time, hold down c and press I
(or press just * ).
2 Press e or h until the desired number of copies is displayed, or use the number keys
to type in the number.
3 Press p (or _ )
TZ-Tape
The set number of labels is printed. The number of the copy being printed is displayed.
☞
If the TZ Cut function is set to ON, each TZ label is automatically cut off after it is
printed.
This completes the procedure for TZ tapes; disregard steps 4 and 5.
AV-Label
CUT MENU appears in the display. Continue with step 4 to finish printing.
4 Press e or h until the desired setting (EACH LABEL or AFTER LAST) is displayed.
If EACH LABEL is selected, each label is cut off after it is printed.
If AFTER LAST is selected, the string of labels are cut off only after they have all been
printed.
5 Press p (or _) to begin printing the labels. The number of the copy being printed is
displayed.
☞
The Repeat printing function cannot be used to print text entered using the Auto Format
function.
TZ-T
ape
AV
-Label
REPEAT PRINTING FUNCTION