Brother PT-2600 User Manual
Page 125
118
NO
FILES!
This message appears if you try to
recall or delete a text file from the
memory when none are stored.
Store a text file first.
NO
TAPE!
This message appears if you try to print
a label or feed the tape when no tape
cassette is installed.
Install a tape cassette and try
again.
REPLACE
BATTERIES!
This message appears if the installed
alkaline batteries are about to run
out.
Replace the batteries or use the
AC adapter.
ROM
PROBLEM!
This message appears if there is a
problem with the machine’s read
only memory.
Turn off the machine, and then
while holding down
c and
R, turn the machine back on.
Contact your service representa-
tive.
SET 1”
TAPE!
SET 24mm
TAPE!
This message appears if a 1” (24-mm)
wide tape cassette is not installed when
an auto format layout for a 1” (24-mm)
wide tape is selected.
Install a 1” (24-mm) wide tape
cassette.
SET 3/4”
TAPE!
SET 18mm
TAPE!
This message appears if an 3/4” (18-
mm) wide tape cassette is not installed
when an auto format layout for an 3/4”
(18-mm) wide tape is selected.
Install an 3/4” (18-mm) wide tape
cassette.
SET 1/2”
TAPE!
SET 12mm
TAPE!
This message appears if a 1/2” (12-mm)
wide tape cassette is not installed when
an auto format layout for a 1/2” (12-
mm) wide tape is selected.
Install a 1/2” (12-mm) wide tape
cassette.
SET 3/8”
TAPE!
SET 9mm
TAPE!
This message appears if a 3/8” (9-mm)
wide tape cassette is not installed when
an auto format layout for a 3/8” (9-
mm) wide tape is selected.
Install a 3/8” (9-mm) wide tape
cassette.
SET 1/4”
TAPE!
SET 6mm
TAPE!
This message appears if a 1/4” (6-mm)
wide tape cassette is not installed when
an auto format layout for a 1/4” (6-
mm) wide tape is selected.
Install a 1/4” (6-mm) wide tape
cassette.
Error Message
Cause
Remedy