Brother PT-2600 - Manual (Page 55)

48
LAMINATED TAPE
The enclosed stick enables you to easily remove the backing from labels printed on laminated tapes.
1
Hold the tape in your left hand, with the printed surface facing up, and hold the stick in your right hand.
2 Pass the tape halfway through the long narrow hole in the stick.
3 Turn the stick three-quarters of a turn towards you and pull the stick away from you as shown below.
4 Peel off the label backing.
FABRIC TAPE
Fabric tape is used to attach a piece of fabric printed with your text onto garments using an
iron. After printing the text onto fabric tape and cutting off the label using scissors, place the
label on an ironed garment at the location where you wish to attach it in such a way that the
printed text can be read correctly. Cover the label with another piece of cloth and use an iron
set to a medium-high temperature (320 to 356 ˚F (160 to 180 ˚C)) and press down firmly for 15
to 30 seconds. For more details, refer to the instructions included with the fabric tape cassette.
STAMP TAPE
Refer to pages 78 through 80 for a detailed explanation on using the stamp tape to make stamps.
AVERY
®
PAPER LABELS
This P-touch can print Avery paper labels one at a time. Just insert a cassette containing AV
labels in one of the three sizes available: address, return address and file folder. Once your
label is printed, simply peel off the Avery label from its backing.
* We recommend only using the lettering stick with laminated tapes.
ATTACHING LABELS
GH
ABCDEF
ABCDEF