Brother PT-2600 - Manual (Page 24)

17
To install the printer driver, click the Yes button.
☞ Windows
®
XP only: A message
appears, informing you that the printer
driver has passed compatibility tests
and that the Continue Anyway button
should be pressed if a warning mes-
sage appears. Click the OK button.
The first Driver Setup dialog box
appears, informing you that the PT-
2600/2610 printer driver will be
installed. Continue with the procedure
in INSTALLING THE PRINTER DRIVER
on page 17.
☞ If the printer driver is already installed,
click the No button. A dialog box appears
explaining that installation is finished.
Select “Yes, I want to restart my computer
now.”, click the Finish button to restart the
computer, and then remove the CD-ROM
from the CD-ROM drive.
INSTALLING THE PRINTER DRIVER
With Plug-and-Play, new devices connected to the system are detected, and their drivers are
automatically installed. If the P-touch 2600/2610 is to be connected through the USB port, its
driver will be installed with Plug-and-Play. Be sure to read the installation instructions
described below before installing the printer driver supplied on the CD-ROM.
☞ Do not connect the P-touch 2600/2610 to the computer until you are instructed to do
so, otherwise the PT-2600/2610 printer driver may not be installed correctly.