Brother PT-H300 - Manual (Page 66)

TROUBLESHOOTING
60
Error Messages
Block Limit!
Max 5 Blocks There are already five blocks of text. Limit the number of blocks to
five.
Length Limit! The length of the label to be printed using the text entered is longer
than 39.37" (1 m). Edit the text so that the length of the label is less
than 39.37" (1 m).
Insert
0.70" Tape
Cassette! An 0.70" (18 mm) tape cassette is not installed when an Auto-Format
for 0.70" (18 mm) tape is selected. Install an 0.70" (18 mm) tape
cassette.
Insert
18mm Tape
Cassette!
Insert
0.47" Tape
Cassette!
An 0.47" (12 mm) tape cassette is not installed when an Auto-Format
for 0.47" (12 mm) tape is selected. Install a 0.47" (12 mm) tape
cassette.
Insert
12mm Tape
Cassette!
Insert
0.35" Tape
Cassette!
An 0.35" (9 mm) tape cassette is not installed when an Auto-Format
for 0.35" (9 mm) tape is selected. Install a 0.35" (9 mm) tape
cassette.
Insert
9mm Tape
Cassette!
Insert
0.23" Tape
Cassette!
An 0.23" (6 mm) tape cassette is not installed when an Auto-Format
for 0.23" (6 mm) tape is selected. Install a 0.23" (6 mm) tape
cassette.
Insert
6mm Tape
Cassette!
Insert
0.13" Tape
Cassette!
An 0.13" (3.5 mm) tape cassette is not installed when an Auto-
Format for 0.13" (3.5 mm) tape is selected. Install an 0.13" (3.5 mm)
tape cassette.
Insert
3.5mm Tape
Cassette!
Too Much Text
For This Layout!
The maximum number of characters for the selected layout have
already been entered. Edit the text to use fewer characters or use a
different layout.
Text
Too Long! The length of the label to be printed using the text entered is longer
than the length setting. Edit the text to fit within the set length or
change the length setting.
Message Cause/Remedy