Brother PT-H300 - Manual (Page 60)

54
Storing a Label into Memory
USING THE FILE MEMORY
You can store up to 50 of your most frequently used labels in the file memory. Each label is
stored as a file, allowing you to quickly and easily recall your label when needed again.
After entering the text and formatting the label, press the File key to display the File
screen.
Select "Save" using the or key.
Press the OK or Enter key. A file number is displayed.
A label text is also displayed if a label is already stored in that file number.
Select a file number using the or key, and then press the OK or Enter key to
save the label under the selected file number.
The file is saved and the screen returns to the text entry screen.
Press the File key to display the File screen.
Select "Open" using the or key.
Press the OK or Enter key. The file number of a stored label is displayed.
The label text is also displayed to identify the label.
Select a file number using the or key, and then press the OK or Enter key to
open the selected file. The file is opened and displayed on the text entry screen.
When the file memory is full, each time you save a file you will need to overwrite one of your stored files.
Storing a Label into Memory
1
2
3
4
When there is already a stored file in the selected number, the data will be overwritten by the file you
try to save.
• Press the Escape key to return to the previous step.
• Up to 200 characters can be saved in one file. However, the number of characters that can be saved may
differ, for example when entering symbols.
• To store a label created by using the Auto-Format Layouts, refer to “Using Auto-Format Layouts” on
page 38.
Opening a Stored Label File
1
2
3
4
Press the Escape key to return to the previous step.