Brother PT-H300 - Manual (Page 51)

1
2
3
4
5
6
7
8
9
45
z
ED
ITING A L
ABEL
Creating a Bar Code Label
Select a character using the or key, then press the
OK or Enter key to insert the character in the bar code data.
Press the OK or Enter key to insert the bar code in the label.
The bar code is displayed on the text entry screen.
z
Bar Code Settings
z
z Special Character List z
CODE39 CODABAR
6
7
• The "C.Digit" (Check Digit) attribute is only available for the CODE39, I-2/5 and CODABAR protocols
• Press the Escape key to return to the previous step.
• Press the Space key to set the selected attribute to the default value.
• Refer to the Bar Code Settings table for a list of all available settings.
Attribute Value
Protocol
CODE39, CODE128, EAN-8, EAN-13,
GS1-128 (UCC/EAN-128), UPC-A, UPC-E, I-2/5 (ITF),
CODABAR
Width
Small
Large
Under#
(characters printed below
bar code)
On
Off
C.Digit
(check digit)
Off
On
(only available for the CODE39, I-2/5
and CODABAR protocols)
Code Special Character Code Special Character
0 0
1 1
2 (SPACE) 2
3 3
4 4
5 5
6