Brother PT-H300 - Manual (Page 45)

1
2
3
4
5
6
7
8
9
39
z
ED
ITING A L
ABEL
Using Auto-Format Layouts
Enter the text and then press the OK or Enter key.
Repeat this for each text field.
After all text fields are entered, the print menu is displayed
when the OK or Enter key is pressed.
Select "Print" using the or key and then press the OK or Enter key to display
the Copies screen.
Select the number of copies to be printed using the or
key, or type the number using the number keys.
Press the OK or Enter key to print the labels.
"Printing...Copies" is displayed while the labels
are being printed.
9
10
• Select "Edit" to change the text data or style settings.
• Select "Save" to store the label in a file memory.
• Select "Cancel" to exit the Auto-Format function.
• Select “Print Options” to set the print settings.
11
12
• Press the Escape key to return to the previous step.
• On the Style and Bar Code Setup screens, press the Space key to change the selected attribute to the
default value.
• Refer to the Templates table for a list of available templates.
• If the width of the current tape cassette does not match the set width for the selected layout, an error
message is displayed when you try to print the label. Press the Escape key or any other key to clear the
error message, and insert a tape cassette of the correct width.
• If the number of characters entered exceeds the limit, “Text Too Long!” is displayed when the OK or
Enter key is pressed. Press the Escape key or any other key to clear the error message, and edit the text
using fewer characters.