Mirror printing – Brother PT-H300 User Manual
Page 55
1
2
3
4
5
6
7
8
9
49
z
LABEL
ING
Printing a Label
Mirror Printing
Using the mirror printing function you can create labels with the text printed in reverse so
that they can be read from the opposite side when attached to glass or other transparent
material.
Make sure that the appropriate tape cassette is inserted and ready for printing.
Press the Print Options key to display the print options screen, and then select
“Mirror” using the or key.
Press the OK or Enter key.
The message “Print OK?” is displayed
Press the OK or Enter key. "Printing...Copies" is displayed
while the labels are being printed.
• Press the Escape key to return to the previous step.
• The figures shown on the screen during printing indicate the “count / number of copies”.
• Pressing the Space key when selecting the number of copies resets the value to 1, the default.
• Auto-numbering can also be applied to bar codes. When a bar code contains an auto-numbering sequence,
no other fields in the label can contain an auto-numbering sequence.
• The auto-number portion of the label is incremented after each label is printed.
• Only one auto-numbering sequence can be used in a label.
• Any symbols or other non-alphanumeric characters in the auto-numbering sequence are ignored.
• An auto-numbering sequence can only contain a maximum of five characters.
• Letters and numbers increase as shown below:
0
О 1
...9 О 0
О ...
A
Î B
...Z Î A Î ...
a
Î b
...z Î a
Î ...
A0 Î A1
...A9 Î B0 Î ...
Spaces (shown as underscores “_” in the example below) can be used to adjust the spacing between
characters or to control the number of digits that are printed.
_9
О 10
...99 О 00 О ...
_Z
Î AA
...ZZ Î AA О ...
1_9 О 2_0
...9_9 О 0_0 О ...
1
2
3
4
• Press the Escape key to return to the previous step.
• Text should be printed on clear tape when using the mirror printing function.
• The copy and auto-numbering functions cannot be used together with the mirror printing function.