Brother PT-H300 - Manual (Page 33)

1
2
3
4
5
6
7
8
9
27
z
ED
ITING A L
ABEL
Entering Symbols
Using the or key, select “Text Only” to delete all text
while retaining the current format settings, or select “Text &
Format” to delete all text and format settings.
Press the OK or Enter key.
All text is deleted. All format settings are also deleted if
Text & Format was selected.
In addition to the symbols available on the keyboard, there are various symbols (including
international and extended ASCII characters) available with the symbol function.
To enter a symbol, use the Symbol function (see below).
Alternatively, press the Shift key and then press a key on the keyboard to enter the symbol
printed on the selected key's upper-right corner.
Entering Symbols Using the Symbol Function
Press the Symbol key.
A list of symbol categories and symbols in that category is
displayed.
Select a symbol category (Punctuation, Business, Mathematics, etc.) using the or
key or by pressing the Symbol key repeatedly, and then press the OK or Enter
key.
Select a symbol using , , or key and then press the OK or Enter key.
The selected symbol is inserted into the line of text.
Press the Escape key to return to the text entry screen, without
erasing (or clearing) text or format.
2
3
Entering Symbols
1
The last symbol entered is selected in the displayed list.
2
3
When selecting symbol:
• Press the Shift key and Symbol key to return to the previous page.
• Press the Symbol key to return to the next page.
Press the Escape key to return to the previous step.