Brother MFC-5100C - Manual (Page 93)

10 - 6 M A K I N G C O P I E S
BHL-FB-MFC-5100C-FM5.5
Paper Type
You can change the paper type setting for the next copy only.
1 Place the original face up in the ADF, or face down on the scanner glass.
2 Use the dial pad to enter the number of copies you want (up to 99).
3 Press Options and press to select OPT:PAPER TYPE , and then press
Menu/Set.
4 Press to select the type of paper you are using ( PLAIN , INKJET ,
GLOSSY or TRANSPARENCY ), and then press Menu/Set.
5 If you selected GLOSSY , press to select 4-COLOR or 3-COLOR , and
then press Menu/Set.
6 Press Black Copy or Color Copy—OR—Press for additional settings.
Paper Size
You can change the paper size setting for the next copy only.
1 Place the original face up in the ADF, or face down on the scanner glass.
2 Use the dial pad to enter the number of copies you want (up to 99).
3 Press Options and select OPT:PAPER SIZE , and then press Menu/Set.
4 Press to select the size of paper you are using ( LETTER , LEGAL , A4 or
POST CARD : 4"
×
6" ), and then press Menu/Set.
5 Press Black Copy or Color Copy—OR—Press for additional settings.
Copy Brightness
1 Place the original face up in the ADF, or face down on the scanner glass.
2 Use the dial pad to enter the number of copies you want (up to 99).
3 Press Options and press to select
OPT:BRIGHTNESS ,
and then press Menu/Set.
Note
The print quality of black ink varies depending on the kind of glossy paper you
are using. Black ink is used when you select
4-COLOR . If the glossy paper you
are using repels the black ink, select 3-COLOR , which simulates black ink by
combining the three ink colors.
or
or
or
or
or
or
or