Brother MFC-5100C - Manual (Page 66)

S E T U P S E N D 6 - 1
6
BHL-FB-MFC-5100C-FM5.5
6
Setup Send
Before You Begin
You can send a fax from the ADF (Automatic Document Feeder) or from the
scanner glass.
Sending Faxes Using Multiple Settings
When you send a fax you can choose any
combination of these settings: set the
contrast or resolution; send using
overseas mode, delayed fax timer,
polling transmission or real time
transmission. After each menu selection is accepted, the LCD will ask if you
want to enter other settings:
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings, and then go
to the next step.
Faxing from the ADF (Automatic Document Feeder)
The ADF can hold up to 30 pages, feeding each one individually through the
MFC. Use standard (20 lb/75g/m
2 ) paper when using the ADF and always fan
the pages well first.
Recommended Environment
■ Make sure documents written with ink are completely dry.
■ Originals to be faxed must be from 5.8 to 8.5 inches wide and 5.8 to 14 inches
long.
Temperature: 68°F – 86°F (20°C – 30°C)
Humidity: 50% – 70%
Paper: Xerox 4200 (20LB/LTR)
DO NOT use curled, wrinkled, folded, ripped paper, or paper with staples, paper
clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric. (To
fax this kind of original, see
Faxing from the Scanner Glass , page 6-3.)
A C C E P T E D
O T H E R S E T T I N G S ?
1 . Y E S 2 . N O