Brother MFC-5100C - Manual (Page 189)

19 - 11 T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
BHL-FB-MFC-5100C-FM5.5
STEP B: Alignment Check
The LCD shows:
Check the 600 DPI and 1200 DPI test prints to see if number 5 most closely
matches number 0. If the number 5 sample of both the 600 DPI and 1200 DPI
are the best matches, press 1 (
YES ) to finish STEP B––OR––
If another test print number is a better match for either 600 DPI or 1200 DPI,
press 2 (
NO ) to select it.
For 600 DPI, press the number of the test
print that most closely matches the
number 0 sample (1-8).
For 1200 DPI, press the number of the
test print that most closly matches the
number 0 sample (1-8).
4 Repeat Steps 1 and 2 (in Print Quality Check) to print another sample Print
Quality Check Sheet and then check it.
5 Press Stop/Exit.
When an ink head nozzle is clogged
the printed sample looks like this. After the ink head nozzle is cleaned,
the horizontal lines are gone.
I S S T E P “ B ” O K ?
1 . Y E S 2 . N O
600 DPI
1200 DPI
}
}
Do NOT select
6 0 0 D P I A D J U S T
S E L E C T B E S T #
1 2 0 0 D P I A D J U S T
S E L E C T B E S T #