Brother MFC-9440CN - Manual (Page 41)

Network printing from Windows ® : basic TCP/IP Peer-to-Peer printing
33
5
g
Follow the on-screen instruction, and then click OK.
Note
Contact your administrator if you are not sure about the location and name of the printer in the network.
h
Continue through the wizard clicking Finish when complete.
Printer driver already installed
5
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
a For Windows Vista
®
:
Click button, Control Panel, Hardware and Sound, and then Printers.
For Windows
®
XP and Windows Server
®
2003:
Click the Start button and select Printers and Faxes windows.
For Windows
®
2000.
Click the Start button and select Settings and then Printers.
b Right click on the printer driver you wish to configure, and then select Properties.
c Click the Ports tab and click Add Port.
d Select the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the
New Port... button.
e The Standard TCP/IP Port Wizard will start.
f Enter the IP address of your network printer. Click Next.
g
Click Finish.
h
Close Printer Ports and Properties dialog box.
Other sources of information
5
See Configuring your network printer on page 8 to learn how to configure the IP address of the printer.