Brother MFC-9440CN - Manual (Page 32)

Control panel setup
24
3
Ethernet
3
Ethernet link mode. Auto allows the print server to operate in 100BASE-TX full or half duplex, or in 10BASE-T
full or half duplex mode by auto negotiation.
100BASE-TX Full Duplex (100B-FD) or Half Duplex (100B-HD) and 10BASE-T Full Duplex (10B-FD) or Half
Duplex (10B-HD) fix the print server link mode. This change is valid after the print server has been reset
(default is Auto).
Note
If you incorrectly set this value, you may not be able to communicate with your print server.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c
Press a or b to choose Ethernet.
Press OK.
d Press a or b to choose Auto, 100B-FD, 100B-HD, 10B-FD or 10B-HD.
Press OK.
e Press Stop/Exit.
Scan to FTP
3
You can choose the default color file type for the Scan to FTP function.
a
Press Menu.
b Press a or b to choose LAN.
Press OK.
c
Press a or b to choose Scan to FTP.
Press OK.
d
Press a or b to choose Color 150 dpi, Color 300 dpi, Color 600 dpi, B&W 200 dpi or
B&W 200x100 dpi.
Press OK.
e If you chose Color 150 dpi, Color 300 dpi or Color 600 dpi in d, press a or b to choose PDF
or JPEG.
If you chose B&W 200 dpi or B&W 200x100 dpi in d, press a or b to choose PDF or TIFF.
Press OK.
f
Press Stop/Exit.
Note
For how to operate Scan to FTP, see Network Scanning of the Software User’s Guide on the CD-ROM.