Brother MFC-3240C - Manual (Page 41)

HOW TO SCAN USING WINDOWS ® 2 - 9
Brother Scanner Utility
The Brother Scanner Utility is used for configuring the scanner driver
for resolutions greater than 1200 dpi and for changing the paper size.
If you want to set Legal size as the default size, change the setting
using this utility. You must restart your PC for the new settings to take
effect.
To run the utility:
You can run the utility by selecting the Scanner Utility located in the
Start/All Programs/Brother/MFL-Pro Suite MFC-XXXXC menu.
(Where XXXX is your model name.)
TWAIN compliant scanner driver for Windows
®
XP
If you have chosen to use the optional TWAIN Driver supported for
Windows
®
XP, follow the description for Windows
®
98/98SE/Me and
2000 Professional (See page 2-1 for instructions on how to turn the
Windows
®
XP TWAIN driver ON).
The paper size setting is not available for the MFC-3240C,
MFC-3340CN and MFC-210C.
If you scan the document at a resolution of greater than 1200
dpi, the file size may be very large. Please make sure that you
have sufficient memory and hard disk space for the size of the
file you are trying to scan. If you do not have enough memory or
hard disk space then your computer may freeze and you could
lose your file.