beautypg.com

Esc i a switch command mode – Brother TD-4100N User Manual

Page 89

background image

ESC i a Switch command mode

[ASCII] ESC i a n

[Decimal] 27 105 97 n

[Hexadecimal] 1B 69 61 n

[Parameters]

n ：Command mode

0 or 48 = ESC/P standard mode

1 or 49 = Raster graphics

3 or 51 = P-touch Template mode

[Description]

・

Sets the command mode to ESC/P, P-touch Template and PTCBP (raster graphics).

・

These three modes can be switched dynamically.

・

Since this is a dynamic command, after the unit is turned off and on again, the setting

returns to the previously set value.

89

This manual is related to the following products:
See also other documents in the category Brother Printers: