Brother TD-4100N - Manual (Page 98)

ESC iXX2 Specify default character size
[ASCII] ESC i X X 2 n1 n2 n3 n4
[Decimal] 27 105 88 88 50 n1 n2 n3 n4
[Hexadecimal] 1B 69 58 58 32 n1 n2 n3 n4
[Parameters] n1:02h (Fixed)
n2:00h (Fixed)
00h≤ n3≤FFh
00h≤ n4≤01h
[Description]
・ Specifies the default character size.
n3+(n4*256): Default character size (dots)
・ The following settings (dots) are valid.
24, 32, 33, 38, 42, 46, 48, 50, 58, 67, 75, 83, 92, 100, 117, 133, 150, 167, 200, 233,
267, 300, 333, 367, 400
*The manufacturer ’s default is 32.
・ This command is a static command.
[Remarks]
・ Invalid if the setting is a value outside of the allowable range
98