Brother TD-4100N - Manual (Page 22)

ESC k Select font
[ASCII] ESC k n
[Decimal] 27 107 n
[Hexadecimal] 1B 6B n
[Parameters] 0 ≤ n ≤ 4, 9 ≤ n ≤ 11
[Description]
・ Selects the font.
n=0 ···Brougham (fixed pitch)
n=1 ···Letter Gothic bold (fixed pitch)
n=2 ···Brussels (proportional pitch)
n=3 ···Helsinki (proportional pitch)
n=4 ···San Diego (proportional pitch)
n=9 ···Letter Gothic(fixed pitch)
n=10 ···Brussels(proportional pitch)
n=11 ··· Helsinki(proportional pitch)
・ The default value is n=0 Brougham (fixed pitch).
・ In case font is changed from bit-map fonts to out-line fonts, character size is changed to
default setting(42dots).
・ In case font is changed from out-line fonts to bit-map fonts, character size is changed to
default setting(32dots).
ESC t Select character code table
[ASCII] ESC t n
[Decimal] 27 116 n
[Hexadecimal] 1B 74 n
[Parameters] n=0,1,2
[Description]
・ From the three built-in character code tables, selects the character code table used.
・ n=0: Standard character code table
・ n=1: Eastern European character code table
・ n=2: Western European character code table
・ n=3: (Spare)
22
・ The default setting is n = 0.