Brother TD-4100N - Manual (Page 82)

*Note:
The numbers of characters that can be entered (as listed above) are for the maximum
vertical × horizontal cell settings (144 cells × 144 cells). The number of characters that can
be entered may decrease, depending on the specified settings.
③
\\\
: End of bar code
There must be three backslashes at the end of 2D bar codes.
Sample input
For data “12345” with symbol type ECC square at 40 × 40 with a 3-dot cell size, the
command will be as shown below.
ESC iD 03h 00h 28h(40d) 28h 00h 00h 00h 00h 00h “12345”
\\\
82