Esc k 8-dot standard-density bit image – Brother TD-4100N User Manual

Page 65

・

First, the data is lined up in three rows as follows:

. One dot of the image data is enlarged as follows according to the value of m.

・

As a result, the image is sized depending on the value of m as follows:

m = 71 48 dots vertically x (n1 + n2 *256) * 2 dots horizontally

m = 72 48 dots vertically x (n1 + n2 *256) * 1 dots horizontally

m = 73 48 dots vertically x (n1 + n2 *256) * 1 dots horizontally

ESC K 8-dot standard-density bit image

[ASCII] ESC K n1 n2 Data

[Decimal] 27 75 n1 n2 Data

[Hexadecimal] 1B 4B n1 n2 Data

[Parameters] 0≤n1≤255,0≤n2≤3

The data contains n1 + n2 * 256 byte image data.

[Description]

Specifies that an 8-dot standard-density bit image is printed with the number of dot

positions indicated by n1 and n2.

・

n1 and n2 indicate the number of dot positions.

yte

MSB

yte

…

LSB

m = 71

m = 72

m = 73

yte

…

yte

MSB

LSB

yte

…

yte

MSB

LSB

yte

MSB

yte

…

LSB

MSB

yte

…

LSB

MSB

yte

…

LSB

（

n1＋n2*256）*6 byte

This manual is related to the following products:

TD-4000