Brother TD-4100N - Manual (Page 48)

・
Left edge Left margin position Tab position Tab position Right margin position
・
・
HT Apply horizontal tab
[ASCII] HT
[Decimal] 9
[Hexadecimal] 09
[Parameters] None
[Description]
・ Moves the horizontal print position to the nearest horizontal tab position to the right of
the input position.
・ If there is no horizontal tab position to the right of the input position or the next
horizontal tab position is beyond the right margin, the HT command is ignored.
・ When underlining is specified, no underline is applied between the current position and
the next horizontal tab position.
・ When the unit is switched on, horizontal tab positions are set every 8 columns at 10 cpi.
Even if the character width is changed before the horizontal tab positions are set, the
horizontal tab positions do not change.
・ This command is available only with left alignment.
[Example] Specifying horizontal tabs at Column 4, Column 8, and Column 12, and applying
a horizontal tab
Code
ESC D 04h 08h 0Ch 00h
123456789012 CR A HT B HT C HT D FF
Print result
123456789012
A B C D
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Column
Unprinted area
HT code
Printable area
Example: After the left margin is set to Column 3 and the right
margin to Column 15, horizontal tabs are set at Column 5 and
Column 10, and an HT is performed.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
HT code
Unprinted area
48