Brother TD-4100N - Manual (Page 84)

separated by a backslash and comma (
\
,), immediately before the normal data.
<postal_code> \ ,<country_code> \ ,<service_class> \ ,<normal_bar_code_data>
When “
\
,” is not used three times, the data is written as shown in the following
example.
Example <data1>
\
,<data2>
\
,<normal_bar_code_data>
 Postal code = data1
 Country code = data2
 Service class = default value
If a value other than those listed is entered for a parameter, that parameter is set to its
default value.
Postal code
9 or less numbers, or 6 or
less alphanumeric characters Ignored when not structured carrier message.
Default value: 000000000
Country code
3 or less numbers
Ignored when not structured carrier message.
Default value: 000
Service class
3 or less numbers
Ignored when not structured carrier message.
Default value: 000
*Notes:
If the postal code is specified as alphanumeric characters, characters other than
those listed below are invalid.
A~Z “ # $ % & ‘ ( ) * + , - . / 0~9 :
However, lowercase letters (a~z) are converted to the valid uppercase letters (A~Z).
④
\\\ : End of bar code
There must be three backslashes at the end of 2D bar codes.
84