Brother TD-4100N - Manual (Page 39)

Line feed commands
ESC 0 Specify line feed of 1/8 inch
[ASCII] ESC 0
[Decimal] 27 48
[Hexadecimal] 1B 30
[Parameters] None
[Description]
. Specifies a line feed of 1/8 inch (about 0.32 cm).
. Specifies a line feed of 38/300 inch (= 38 dots).
ESC 2 Specify line feed of 1/6 inch
[ASCII] ESC 2
[Decimal] 27 50
[Hexadecimal] 1B 32
[Parameters] None
[Description]
. Specifies a line feed of 1/6 inch (about 0.42 cm).
. Specifies a line feed of 50/300 inch (= 50 dots).
ESC 3 Specify minimum line feed
[ASCII] ESC 3 n
[Decimal] 27 51 n
[Hexadecimal] 1B 33 n
[Parameters] 0 ≤ n ≤ 255
[Description]
. Specifies a line feed of n/300 inch per line.
. The line feed unit is 1 dot.
39