Brother TD-4100N - Manual (Page 34)

ESC – Applies/cancels underlining
[ASCII] ESC - n
[Decimal] 27 45 n
[Hexadecimal] 1B 2D n
[Parameters] n=0,1,2,3,4 or 48(“0”),49(“1”),50(“2”),51(“3”),52(“4”)
[Description]
Applies or cancels underlining.
. n = 4 or 52(“4”) applies 4-dot-wide underlining.
. n = 3 or 51(“3”) applies 3-dot-wide underlining.
. n = 2 or 50(“2”) applies 2-dot-wide underlining.
. n = 1 or 49(“1”) applies 1-dot-wide underlining.
. n = 0 or 48(“0”) cancels underlining.
. This command is valid anywhere in a text line.
. Underlining printed by this code forms a continuous underline.
・ Spaces between characters and words are also underlined.
・ Areas defined by specifying an absolute horizontal position (ESC $) or relative
horizontal position (ESC \) are not underlined.
・ 4/300 inch (4 dots) is added to the line feed amount for lines that include underlined
characters.
・ With 1-dot-wide underlining, the underline is positioned as follows:
2/300 inch (2 dots) below the characters
・ With 2-dot-wide underlining, the underline is positioned as follows:
Between 2/300 inch (2 dots)
and 3/300 inch (3 dots) below the characters
・ With 3-dot-wide underlining, the underline is positioned as follows:
Between 1/300 inch (1 dot)
and 3/300 inch (3 dots) below the characters
・ With 4-dot-wide underlining, the underline is positioned as follows:
Between 1/300 inch (1 dot)
and 4/300 inch (4 dots) below the characters
ABCDE ABCDE ABCDE
(1-dot width) (3-dot width)
34