Brother TD-4100N - Manual (Page 27)

ESC M Specify elite pitch
[ASCII] ESC M
[Decimal] 27 77
[Hexadecimal] 1B 4D
[Parameters] None
[Description]
・ Prints subsequent data with elite pitch (12 characters/inch).
・ Character width is 25 dots (=300 dots/12 characters).
・ If the character width is 25 dots or less, the character spacing is set to 25 minus the
character width.
・ If the character width exceeds 25 dots, character spacing is set to character width.
(Character spacing is 0 dot.)
In this case, the pitch does not exactly equal the pica pitch.
・ With double-width characters, the character spacing is doubled (50 dots).
・ With half-width characters, the character spacing is reduced to 13 dots.
・ When the character spacing is changed with ESC SP, the setting is updated.
・ This command is invalid when proportional pitch is selected.
・ In out-line fonts, the space between character is 0 dot.
[Example] For a 24-dot font at full width
27
Ａ Ｂ
1 dots
24 dots
Ａ Ｂ
48 dots
2 dots
Full width Double width