Brother TD-4100N - Manual (Page 18)

Document creation flow
Below is an explanation of the flow for creating documents.
ddd
18
A Switch command mode (ESC i a) Initialize (ESC @)
B Format Settings
1. Select landscape orientation (ESC i L)
2. Specify page length (ESC ( C)
3. Specify print area
Specify page format (ESC ( c)
Left/right margins (ESC I, ESC Q)
4. Specify line feed amount (ESC 0, ESC 2, ESC 3, ESC A)
5. Specify tab positions
Specify horizontal tab position (ESC D)
Specify vertical tab position (ESC B)
C Print Operations
1. Specify print position
Specify vertical position (ESC ( v, ESC ( V, VT, ESC J)
Specify horizontal position (ESC $, ESC \, HT, ESC a)
2. Transfer print data (one line)
Transfer necessary text operation codes (see D), bit images, bar codes, and
downloaded data (see E).
3. End of line, feed paper (CR, LF)
4. Repeat 1–3 above.
5. End of page, specify cutting (ESC i C), feed page (FF)
6. Repeat 1–6 above.
7. End of document