Brother TD-4100N - Manual (Page 100)

ESC iX32 Specify default line feed
[ASCII] ESC i X 3 2 n1 n2 n3 n4
[Decimal] 27 105 88 51 50 n1 n2 n3 n4
[Hexadecimal] 1B 69 58 33 32 n1 n2 n3 n4
[Parameters] n1:02h (Fixed)
n2:00h (Fixed)
00h≤ n3≤FFh
00h≤ n4≤04h
[Description]
・ Specifies the default line feed.
n3+(n4*256): Default line feed (dots) (0 through 1275)
*The manufacturer ’s default is 48.
・ This command is a static command.
[Remarks]
・ Invalid if the setting is a value outside of the allowable range
100