Sterlco SSL and SSIL Series Hopper Loaders - Manual (Page 38)

38
5-10 Navigating Series One Plus Controller Menus
You’ll always enter the menu system when the screen displays
AEC
on the controller screen.
This screen displays at startup before you press the
S
START/STOP
START/STOP/SELECT/SET key
to start the hopper loader, and displays again when you press the
S
START/STOP
START/STOP/SELECT/ SET key to stop the hopper loader.
To enter the menu system:
„ When the screen displays AEC, press the
SCROLL
SCROLL key to enter
the menu system.
The screen displays 1, for Menu 1.
„ Press and hold the
SCROLL
SCROLL key to scroll through the eight (8)
menus.
If you scroll past a menu you want:
„ Press and hold both the DOWN key and the
SCROLL
SCROLL key
together simultaneously to scroll backwards through the menus.
When the menu you want displays:
„ Press the
S
START/STOP
START/STOP/SELECT/SET key to gain access to
the menu.
The screen changes to display the current setting of the menu you
selected.
To adjust the current menu parameter:
„ Press the UP key or the DOWN key until the screen displays
the parameter value you want.