Setra System SRCM - Manual (Page 16)

16
Setup Display to configure Condition Banner messages and other Home screen options. There
are four tabs for display customization; General, Advanced, Condition Banner,
Set Time and Date.
The General tab allows the user to define messages for each Condition Banner
color. Pressing anywhere in the colored region of the Condition Banner changes
each selection between GREEN, YELLOW, RED, and BLUE. By pressing on
the colored region of text, the on-screen keyboard pops up, enabling data entry.
If User Defined Text is Disabled, then data entry on the Condition Banner will
not be permitted. Change user defined text to enabled to change the text of each
banner.
There are four condition banner colors available, Green, Yellow, Red and Blue.
In the Setup Display General tab you can configure the text to be displayed
above and below the center symbol by enabling the User defined text. If you
want the banner to blink, Enable the Blink selection.
If any alarm occurs, the condition banner will turn to red and text above and
below the center symbol will display ALARM
The Advanced tab allows the user to make refinements in how information is
Configure whether the user can
change the text of the Condition
Banner. Enabled or Disabled
Configure if you want to enable
banner
When finished making changes,
press Save & Exit to store the
modifications. Or press Exit to
discard changes and return to
the previous screen.
Change color and text of
Condition Banner by pressing
anywhere in the colored region
Select Home screen language
desired, English or French
General Tab — Custom-
izing the
Condition Banner