Setra System SRPM - Manual (Page 19)

19
4.8 SELF TEST SCREEN
Self Test Operation
This screen identifi es the Product Model Part Number and Software
Version. User can also perform a Self Test of the unit to verify that the
data in protected area of the EEPROM memory hasn’t been corrupted
and also test the alarm to verify the sound level and alarm setup.
Press “Self Test” button to initiate EEPROM memory checksum test
sequence.
Press “Alarm Test” to test beeper, visual Red LED Alarm, and relay
output. This can be used to verify the system in alarm mode.
Press “Cancel Test” to stop the alarm test.
Press “Exit” to return to Main Menu.