Setra System SRPM - Manual (Page 13)

13
4.0 STARTUP AND OPERATION
The SRPM is designed with as an easy to use, intuitive, touch screen
interface. In its normal (default) state the Monitoring Screen displays the actual
room static pressure, also a slider bar shows the actual pressure relative
to the alarm limits. The RGB backlight is used to indicate the condition of
the room. The buttons at the bottom of the screen give you access to the
functions that can be performed.
4.1 MENU TREE See section 9.0
4.2 POWER-UP
Apply power and observe the welcome screen and subsequent transition
to the pressure monitor screen. The actual room static pressure is shown
as a number in the center of the LCD and visually as a moving bar
indicator operating between the preset alarm units. The vertical bar is an
indicator of the pressure.
4.3 MONITORING SCREEN
BUTTON DESCRIPTION
Silence
Menu
Reset
Shuts off Alarm
Access to Main Menu Functions
Resets the unit in “Latched” mode.